For food materials, Young’s modulus is usually considered valid across which range of strain

Question

BlackTom AI · Accepted Answer

When evaluating the question about the valid strain range for Young's modulus in food materials, we begin by listing all provided options to compare them against typical elastic behavior.
Option 1: '2 - 5%'. This range is relatively high for elastic (linear) elasticity in many food materials; beyond a small strain, many materials exit the linear-elastic region, so 2–5% is generally too large to be considered universally valid for Young's modulus in foods.
Option 2: '0.01 - 0.1%'. This range is very small and represents a highly limited portion of the elastic region. While some precise measurements use very small strains, stating such a narrow window as the standard across foods would be inaccurate because different foods exhibit different elastic limits and reporting conventions.
Option 3: '0.1 - 2%'. This option sits within the typical experimental experience for many foods, where the linear elastic (Hookean) response often holds up to around a fraction of a percent to a couple percent strain, with 0.1–2% commonly cited as the practical range for defining Young's modulus in food materials.
Option 4: '5 - 20%'. This range is well into the large-strain region for many foods, where material behavior shifts away from linear elasticity toward nonlinear or plastic behavior; thus, it is unlikely to be considered the valid range for defining a constant Young's modulus.
To decide, recall that Young's modulus is defined in the linear-elastic portion of the stress-strain curve, and for food materials this linear region is typically limited to about a percent or two of strain, making 0.1–2% a sensible overall range. The other ranges either underestimate the precision required or extend into nonlinear territory where the modulus would no longer be constant.

For food materials, Young’s modulus is usually considered valid across which range of strain

查看解析

登录即可查看完整答案

类似问题

Given the stress-strain diagram below, if the diagram has its origin at a value of (0.00025, 0) and crosses a point where the stress is 25 ksi and the strain is 0.001, what is the calculated modulus of elasticity?

Calculate the Young's modulus of a 30 MPa concrete with a density 𝜌 = 2400 kg/m3

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单