Two PCs are configured in a network with the IP addresses of 202.11.10.6 and 192.16.20.4, respectively. The PCs can communicate with ____________.

Question

BlackTom AI · Accepted Answer

Let's analyze what happens when two PCs with IP addresses in different networks try to communicate.
Option a. Switch: A switch operates at Layer 2 and forwards frames within the same LAN based on MAC addresses. It does not route traffic between different IP networks, so if the two PCs are on different networks, a switch alone cannot enable communication between them.
Option b. Router: A router works at Layer 3 and connects different IP networks. It makes forwarding decisions based on IP addresses and can route packets between the 202.11.10.0/?? and 192.16.20.0/?? networks, enabling end-to-end communication between the two PCs.
Option c. Bridge: A bridge is similar to a switch in that it tends to operate at Layer 2 and connects network segments. Bridges don’t route between different IP networks; they usually forward frames within a single physical network. Therefore, a bridge cannot connect these two distinct networks.
Option d. Hub: A hub is a simple multiport repeater that operates at Layer 1. It broadcasts all incoming bits to all ports, but it does not perform any IP-level routing or segmentation. With hosts on different networks, a hub cannot facilitate proper inter-network communication.
In summary, only a router provides the necessary inter-network routing capability to allow communication between devices on different IP networks, while switches, bridges, and hubs do not perform this function.

Introduction to Networking (032025-TGK)

Two PCs are configured in a network with the IP addresses of 202.11.10.6 and 192.16.20.4, respectively. The PCs can communicate with ____________.

查看解析

登录即可查看完整答案

类似问题

What type of network is accessed by a single route and the router has only one neighbor?

The process of determining a path through the internet is called routing .

Where do directly-connected routes come from?

routing refers to the process of routing packets via paths that are manually defined on a router, while routing refers to the process of routing packets via paths that may change according to network conditions.

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单

Introduction to Networking (032025-TGK)

Two PCs are configured in a network with the IP addresses of 202.11.10.6 and 192.16.20.4, respectively. The PCs can communicate with ____________.

查看解析

登录即可查看完整答案

类似问题

What type of network is accessed by a single route and the router has only one neighbor?

The process of determining a path through the internet is called routing .

Where do directly-connected routes come from?

________ routing refers to the process of routing packets via paths that are manually defined on a router, while ________ routing refers to the process of routing packets via paths that may change according to network conditions.

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

更多留学生实用工具

希望你的学习变得更简单

routing refers to the process of routing packets via paths that are manually defined on a router, while routing refers to the process of routing packets via paths that may change according to network conditions.