An electric motor is used to accelerate a solid disk (cylinder) flywheel. The flywheel has a mass of 30 kg and a radius of 0.25 m. The flywheel is initially at rest when the elcetric motor applies a torque of 30 Nm for 15 seconds.

What is the final angular speed in revolutions per second of the flywheel?

Round your answer to one (1) decimal place. Do not enter units. Example: 12.3

Question

An electric motor is used to accelerate a solid disk (cylinder) flywheel. The flywheel has a mass of 30 kg and a radius of 0.25 m. The flywheel is initially at rest when the elcetric motor applies a torque of 30 Nm for 15 seconds.

What is the final angular speed in revolutions per second of the flywheel?

Round your answer to one (1) decimal place. Do not enter units. Example: 12.3

BlackTom AI · Accepted Answer

The question involves a solid disk (flywheel) being accelerated by a constant torque. We'll work through the physics step by step.

First, identify the relevant quantities for a solid disk:
- Mass m = 30 kg
- Radius R = 0.25 m
- Moment of inertia I for a solid disk = (1/2) m R^2
Compute I: I = 0.5 × 30 × (0.25)^2 = 15 × 0.0625 = 0.9375 kg·m^2.

Next, use angular impulse–angular momentum relation. A constant torque τ applied for time t gives angular impulse τt, which equals the change in angular momentum Iω: Iω = τt.
Here, the torque τ = 30 N·m and the duration t = 15 s, so the angular impulse is τt = 30 × 15 = 450 N·m·s.

Solve for the final angular speed ω:
ω = (τt) / I = 450 / 0.9375 = 480 rad/s.

Convert rad/s to revolutions per second (rev/s) using the relation 1 rev = 2π rad:
ω (rev/s) = ω / (2π) = 480 / (2π) ≈ 480 / 6.2832 ≈ 76.4 rev/s.

Now about the answer options: the computed value 76.4 matches the listed numeric option shown in the prompt. If you were selecting from multiple choices, this would be the one corresponding to approximately 76.4 rev/s.

Note on potential pitfalls to avoid:
- Forgetting the 0.5 factor in the disk inertia would lead to an incorrect I, and thus a different ω.
- Mixing up units (rad/s vs rev/s) is a common source of error; always convert to the desired unit at the end.
- Using the mass alone without the radius would be insufficient to determine I for a disk; the R^2 term is essential here.

ENGR-216:501,502,503,504,505,506,507,508,509,510,511,512,513,514,515,PHYS-216:501,502,503,504,505,506,507,508,509,510,511,512,513,514,515,516,517,518,519,520,521,522,523,524 Angular Mo and Harmonics

查看解析

登录即可查看完整答案

类似问题

A torque of 12 N ∙ m is applied to a solid, uniform disk of radius 0.50 m. If the disk accelerates at 5.7 rad/s2, what is the mass of the disk?

When a solid object rotates with a constant angular acceleration, which of the following is true?

Angular impulse is the product of Answer Question 9[input] and time. NOTE: The answer requires a single word and correct spelling. Double check the spelling.

If the four positions below were held constant and for a complete dive, which would result in the highest average angular velocity around the mediolateral axis of the body's centre of mass? Assume all other factors are the same (body mass, segment lengths and masses, dive height, etc)

Starting from rest, a 25 cm diameter disk takes 5.0 s to reach its final angular velocity of 2500 rpm (rotations per minute). Assume that the angular acceleration is constant. The disk has a moment of inertia of 2.3 × 10 − 5 kg m 2 How much torque is applied to the disk in these 5.0 s?

A solid rigid object with a moment of inertia of 12 kgm2 has an initial angular velocity of 9 rads-1 clockwise. A torque of 44 Nm was then applied to the object in the opposite direction to the initial angular velocity. After 3 s the object will have an angular speed closest to:

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单