In the figure, suppose that ε = 51.3 V, R = 247 Ω, and L = 0.197 H. With switch S2 open, switch S1 is left closed until a constant current is established. Then at time t = 0 s, S2 is closed and S1 opened, taking the battery out of the circuit. What is the potential difference between points b and c at t = 3.58 × 10-4 s?

Write your answer in the units of volt (V) in decimal form with one digit to the right of the decimal point (e.g. 5.3).

Do not include units or sign in your answer; just write the numerical value.

Question

In the figure, suppose that ε = 51.3 V, R = 247 Ω, and L = 0.197 H. With switch S2 open, switch S1 is left closed until a constant current is established. Then at time t = 0 s, S2 is closed and S1 opened, taking the battery out of the circuit. What is the potential difference between points b and c at t = 3.58 × 10-4 s?

Write your answer in the units of volt (V) in decimal form with one digit to the right of the decimal point (e.g. 5.3).

Do not include units or sign in your answer; just write the numerical value.

BlackTom AI · Accepted Answer

First, restating the problem setup: with S2 open and S1 closed, a constant current is established from the emf source ε through the R-L series. At t = 0 s, S2 is closed and S1 is opened, removing the battery from the circuit, and we are asked for the potential difference between points b and c at t = 3.58 × 10^-4 s.

Key model: after S2 closes and the source is removed, the circuit containing the resistor R and inductor L forms a simple RL discharging network. The current i(t) in an RL circuit with initial current I0 decaying is given by i(t) = I0 e^{-(R/L) t}.

Step 1 — Determine initial current I0.
- Before t = 0, S1 was closed and the source ε was connected in series with R and L, so a steady current I0 was established: I0 = ε / R.
- Numerically, I0 = 51.3 V / 247 Ω ≈ 0.2079 A.

Step 2 — Current decay after the switch change.
- After t = 0, the source is removed, so the current decays as i(t) = I0 e^{-(R/L) t}.
- Compute the time constant parameter α = R/L = 247 Ω / 0.197 H ≈ 1253.80 s⁻¹.
- The given time t = 3.58 × 10^-4 s yields the exponential factor e^{-(R/L) t} = e^{-α t} ≈ e^{-1253.80 × 3.58×10^-4} ≈ e^{-0.449} ≈ 0.638.

Step 3 — Express the voltage between b and c.
- The points b and c lie across the inductor L. The voltage across an inductor during current change is v_L = L di/dt.
- Differentiate i(t): di/dt = - (R/L) I0 e^{-(R/L) t} = - (R/L) i(t).
- Therefore v_L = L di/dt = - R i(t) = - R I0 e^{-(R/L) t} = - ε e^{-(R/L) t}.

Step 4 — Plug in numbers for V_bc.
- V_bc = V_b − V_c = v_L = - ε e^{-(R/L) t}.
- Numerically, V_bc ≈ - 51.3 V × 0.638 ≈ -32.7 V.

Step 5 — Interpret the result in the requested form.
- The magnitude of the potential difference between b and c at the specified time is approximately 32.7 V, and the sign indicates the polarity given by the assumed orientation (b to c) for the inductor voltage in this discharging scenario.

Note on the absence of answer options: the provided data shows an exact numerical answer of 2.7 in some contexts, but following the standard RL decoding with the given values leads to approximately 32.7 (with the sign determined by the chosen reference for b to c). If your assessment uses a different reference direction or a different circuit convention, the numerical value could reflect that convention. Regardless, the method hinges on i(t) = I0 e^{-(R/L)t} and v_L = -R i(t) = -ε e^{-(R/L)t}.

ENGR-217:201,202,203,204,501,502,505,506,515,516,521,522,523,524,525,526,535,536,PHYS-217:203,204,501,502,503,531,532,533 Final Exam

查看解析

登录即可查看完整答案

类似问题

An emf source is used in an RL circuit until steady state current is established. Then at a time instant t = 0, the emf source is removed from the circuit while keeping continuity in the RL circuit. Considering the time after instant t = 0, select all that apply:

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单