If I add a completely parallel branch to an existing circuit then the equivalent (or total) resistance of the circuit will..

Question

BlackTom AI · Accepted Answer

Consider the effect of adding a completely parallel branch to an existing circuit. 
Option 1: 'decrease' - This is the correct general outcome because in parallel, the total or equivalent resistance is given by 1/R_eq = 1/R_old + 1/R_branch. Adding another positive conductance path always lowers the overall resistance unless the branch is an open circuit. 
Option 2: 'remain the same' - This would only occur if the added branch contributed no new current path, such as an infinite resistance (an open circuit). In general, that's not the typical case, so this statement is misleading as a universal rule. 
Option 3: 'increase or decrease depending on the resistance of the parallel branch' - While intuitive, the actual formula shows that for any finite, nonzero branch resistance, 1/R_eq increases, making R_eq smaller. The only caveats are special cases (open circuit or a short) that can change the outcome, but not in the typical scenario. 
Option 4: 'increase' - This would imply that adding a parallel path makes the circuit harder for current to pass, which contradicts the fundamental property of parallel resistances where multiple paths decrease the total resistance. 
Side note: if the added branch is an open circuit (infinite resistance), the total resistance remains unchanged; if it is a perfect short (zero resistance), the total resistance drops to zero regardless of the original value. These edge cases illustrate why the general rule is: adding a parallel path tends to decrease the total resistance, not increase.

Physics Honors-Henrikson Unit 11 and part of 12 Test part 1

If I add a completely parallel branch to an existing circuit then the equivalent (or total) resistance of the circuit will..

查看解析

登录即可查看完整答案

类似问题

Which is correct concerning a parallel circuit?

Which is correct concerning a parallel circuit?

Which statement is correct when made in reference to a parallel circuit?

Which is correct in reference to electrical resistance?

The lamps in a string of decorative lights are connected in parallel across a constant-voltage power source. What happens if one lamp burns out? (Assume negligible resistance in the wires leading to the lamps.)

When unequal resistors are connected in parallel in a circuit,

In the circuit below, i = 4.0 Amps, R1 = 5.8Ω and R2 = 3.5Ω. Find Vs in Volts to 2dp.

I have a simple circuit running off a battery powering a lightbulb (bulb A). If I add another light (bulb B) parallel to bulb A I can expect that the voltage across bulb A will _ and bulb A will shine___.

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单

Physics Honors-Henrikson Unit 11 and part of 12 Test part 1

If I add a completely parallel branch to an existing circuit then the equivalent (or total) resistance of the circuit will..

查看解析

登录即可查看完整答案

类似问题

Which is correct concerning a parallel circuit?

Which is correct concerning a parallel circuit?

Which statement is correct when made in reference to a parallel circuit?

Which is correct in reference to electrical resistance?

The lamps in a string of decorative lights are connected in parallel across a constant-voltage power source. What happens if one lamp burns out? (Assume negligible resistance in the wires leading to the lamps.)

When unequal resistors are connected in parallel in a circuit,

In the circuit below, i = 4.0 Amps, R1 = 5.8Ω and R2 = 3.5Ω. Find Vs in Volts to 2dp.

I have a simple circuit running off a battery powering a lightbulb (bulb A). If I add another light (bulb B) parallel to bulb A I can expect that the voltage across bulb A will _________ and bulb A will shine___________.

更多留学生实用工具

希望你的学习变得更简单

I have a simple circuit running off a battery powering a lightbulb (bulb A). If I add another light (bulb B) parallel to bulb A I can expect that the voltage across bulb A will _ and bulb A will shine___.