Question at position 47 Items produced by a manufacturing process are supposed to weigh 90 grams. The manufacturing process is such, however, that there is variability in the items produced and they do not all weigh exactly 90 grams. The distribution of weights can be approximated by a Normal distribution with a mean of 90 grams and a standard deviation of 1 gram. About what percentage of the items will either weigh less than 87 or more than 93 grams?6%0.3%0.15%94%99.7%

Question

BlackTom AI · Accepted Answer

We’re told the weights are Normal with mean 90 g and standard deviation 1 g, and we want the probability that a weight is either below 87 g or above 93 g.
First, convert the cutoffs to z-scores: (87 − 90)/1 = −3 and (93 − 90)/1 = +3. So we’re looking for P(X < 87 or X > 93) = P(|Z| > 3) where Z ~ N(0,1).
For a standard normal, P(|Z| > 3) is the tail probability beyond ±3 sigma. The one-sided tail P(Z > 3) is about 0.00135, so the two tails combined are approximately 0.0027, i.e., 0.27%.
Now evaluate each option:
- 6%: This is far too large; it would correspond to a much wider interval than ±3 sigma (roughly ±1.55 to capture 94% in the center), not ±3 sigma. Misconception: treating 3-sigma as frequent as 6% outside.
- 0.3%: This matches the calculation 0.27% which is very close to 0.3% when rounded to one significant figure or a single decimal place. Reasonable approximation of the two-tail area beyond ±3.
- 0.15%: This is roughly half of the true two-tail probability beyond ±3 sigma, suggesting the student may have halved the tail or used an incorrect z-value.
- 94%: This would imply only 6% outside, which corresponds to a much smaller cutoff (about ±1.5 sigma) and is inconsistent with ±3 sigma.
- 99.7%: This is the central portion within ±3 sigma, not the outside region. If 99.7% are inside, only 0.3% are outside, but the phrasing here would be about the inside probability, not the outside.
In summary, the correct interpretation of the ±3 sigma threshold yields a two-tailed outside probability of roughly 0.27%, which is best represented by the option closest to that value.

查看解析

登录即可查看完整答案

类似问题

X~N(3, 1) and Y~N(3, 2), then

Question at position 50 A soft-drink machine can be regulated so that it discharges an average of ? oz per cup. If the ounces of fill are Normally distributed with a standard deviation of 0.4 oz, what should ? be set at so that 98% of the 6-oz cups will not overflow?6.606.826.006.185.18

In a normal distribution where X ~N(0,1) , approximately what is the probability that X is between -1 and 0.

Suppose that the number of credit hours a student takes follows a normal distribution with a mean of 17 credit hours and a standard deviation of 2 credit hours. A normal course load is between 12 and 19 hours. What proportion of students have a normal course load?

The mean height of a bull population is 150cm. The population shows a normal distribution with a standard deviation of 7cm. What will be the maximum height of bulls that are within 2 standard deviations of the mean?

Is BaP response-frequency approximately normally distributed with respect to log(dose)?

Question at position 4 ________ is the continuous probability distribution used most often for economics and business applications.Normal probability distributionExponential distributionUniform distributionIncremental distribution

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单