When should a pilot begin the missed approach procedure if the runway is not in sight when cleared for the VLD VOR 17 circling approach?

Question

BlackTom AI · Accepted Answer

Question restatement: The query asks when a pilot should commence the missed approach procedure if the runway is not in sight while cleared for the VLD VOR 17 circling approach.

Option 1: 0.6 DME from OTK. This choice implies starting the missed approach at a fixed DME distance from the OTK VOR/DME. However, for this circling approach the published missed approach point is not defined at 0.6 DME; the procedure specifies a MAP location tied to the VOR/DME fix rather than an arbitrary distance. Therefore, this option is incorrect.

Option 2: 1.9 DME from OTK. Similar to option 1, selecting a fixed DME value as the missed approach point does not align with the published chart guidance for this approach. The chart does not designate 1.9 DME as the MAP for the VLD VOR 17 circling procedure, so this is incorrect.

Option 3: 2.5 DME from OTK. Again, treating 2.5 DME as the point to initiate the missed approach conflicts with the chart’s published MAP. The circling approach relies on a specific location associated with the VOR/DME rather than a DME distance like 2.5, making this option incorrect.

Option 4: Upon crossing the OTK VOR/DME. This is consistent with the procedure depiction and text for this circling approach: the missed approach is initiated at the missed-approach point located at the OTK VOR/DME when the runway is not in sight. The diagram and notes indicate climbing to a procedure altitude and turning to the missed-approach track from that fix, which means you must be established on passing over the OTK VOR/DME to begin the climb and hold as published. Consequently, this option is correct.

Key reasoning and potential misconceptions:
- Misconception in options 0.6, 1.9, and 2.5 DME: Many charts use distance-to-fix values for certain steps, but the VLD VOR 17 circling approach uses a fixed MAP location at the OTK VOR/DME rather than a fixed DME distance from OTK for the missed approach. Relying on a distance value here would violate the published MAP and could lead to initiating the miss at an incorrect point.
- Why this aligns with the chart: The missed-approach action is triggered when the aircraft reaches the MAP and the required visual references are not in sight. For this approach, the MAP is defined by crossing the OTK VOR/DME, not by a particular DME reading from OTK.
- Safety and procedure consistency: Initiating the missed approach at the OTK VOR/DME ensures you meet the altitude and heading requirements described in the missed-approach segment, and you enter the published holding pattern as specified.

Therefore, after evaluating all options, the correct choice is the one that states to commence the missed approach upon crossing the OTK VOR/DME, with the understanding that this aligns with the charted MAP for the VLD VOR 17 circling approach.

FA_221 Lesson 22 Quiz

When should a pilot begin the missed approach procedure if the runway is not in sight when cleared for the VLD VOR 17 circling approach?

查看解析

登录即可查看完整答案

类似问题

When should we go missed on an ILS approach?

If an IFR approach cannot be continued the pilot executes an IFR procedure called a _______________, unless otherwise instructed by ATC.

A missed approach is designed to get the aircraft back to the enroute structure while maintaining clear of obstacles.

If requested by ATC to execute a missed approach procedure a pilot must comply.

If requested by ATC to execute a missed approach procedure a pilot must comply.

When reaching the missed approach point a pilot should contact ATC and wait for further instructions before beginning the missed approach.

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单