When should a pilot begin the missed approach procedure if the runway is not in sight when cleared for the OCF VOR 36 approach straight in?

Question

BlackTom AI · Accepted Answer

To analyze the missed approach requirement for the OCF VOR RWY 36 straight-in, we must first identify where the missed approach point (MAP) is defined on this procedure.

Option 1: 'Upon crossing the OCF VORTAC' — This corresponds to the MAP for this approach. The chart indicates the missed approach point is defined at the VORTAC location, so you initiate the missed approach as you pass over the OCF VORTAC if the runway is not in sight.

Option 2: '2.7 DME from OCF' — This would be a distance-based MAP, but the published MAP for this straight-in VOR approach is not defined at 2.7 DME. Using 2.7 DME would not align with the charted MAP, and initiating the missed at that distance could occur too early or too late relative to the published procedure.

Option 3: '1.7 DME from OCF' — Similar to option 2, this is another distance-based value that does not match the chart’s MAP definition. Relying on 1.7 DME would not reflect the official missed approach point for this procedure.

Option 4: 'Upon reaching 640 ft' — Altitude alone is not the MAP for this approach. While minimums and altitude steps exist during the approach, the MAP is not determined by reaching a specific altitude; you must identify the MAP geometry (in this case, crossing the OCF VORTAC) to commence the missed approach.

In summary, the correct procedure relies on the documented MAP, which for this VOR RWY 36 straight-in is the point at which you cross the OCF VORTAC. The other options propose alternative MAP definitions (distance-based or altitude-based) that do not correspond to the published missed approach point for this approach.

FA_221 Lesson 21 Quiz

When should a pilot begin the missed approach procedure if the runway is not in sight when cleared for the OCF VOR 36 approach straight in?

查看解析

登录即可查看完整答案

类似问题

When should we go missed on a VOR approach?

If an early missed approach is initiated before reaching the MAP, the following procedure should be used unless otherwise cleared by ATC.

When reaching the missed approach point a pilot should contact ATC and wait for further instructions before beginning the missed approach.

What steps should be taken when you reach the missed approach point and the runway nor any visual references are not in sight?

When should a pilot begin the missed approach procedure if the runway is not in sight when cleared for the LGA VOR 4 approach straight in?

When on the missed approach on the APC ILS runway 36 left, what route should the pilot fly?

What steps should be taken when you reach the missed approach point and the runway nor any visual references are not in sight?

When reaching the missed approach point a pilot should contact ATC and wait for further instructions before beginning the missed approach.

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单