A student measures the density of a liquid five times and gets the results (all in gram/cm3 ) 1.8, 2.0, 2.0, 1.9, and 1.8.

What would you suggest as the best estimate and uncertainty based on these measurements?

Question

A student measures the density of a liquid five times and gets the results (all in gram/cm3 ) 1.8, 2.0, 2.0, 1.9, and 1.8.

What would you suggest as the best estimate and uncertainty based on these measurements?

BlackTom AI · Accepted Answer

The problem presents a set of density measurements for a liquid: 1.8, 2.0, 2.0, 1.9, and 1.8 g/cm^3. To decide the best estimate and uncertainty, we examine the provided options and the common ways to estimate uncertainties from repeated measurements.

Option 1: best estimate = 1.9 g/cm^3 ; uncertainty = 0.1 g/cm^3
This uses the mean of the measurements as the best estimate, which is (1.8 + 1.8 + 1.9 + 2.0 + 2.0)/5 = 9.5/5 = 1.9. The uncertainty here is 0.1, which corresponds to half of the overall range of the data (range = 2.0 − 1.8 = 0.2). This half-range approach is a common quick-and-dirty way to quote an uncertainty when you have a small sample: you state the spread of the data as ± half the range.

Option 2: best estimate = 1.9 g/cm^3 ; uncertainty = 0.2 g/cm^3
Here the uncertainty equals the full range (0.2). While this captures the total spread, it overstates the precision a bit, since a single value of ±0.2 around 1.9 would allow values from 1.7 to 2.1, but the data’s central tendency is better described with a tighter figure like ±0.1 using the half-range method or a standard error estimate. This option is not consistent with common practice for small data sets where half the range is preferred over the full range as the uncertainty.

Option 3: best estimate = 1.90 g/cm^3; uncertainty = 0.02 g/cm^3
This uses two decimal places for both the estimate and the uncertainty, implying a precision not supported by the data. The measurements lie at 1.8, 1.9, and 2.0 to one decimal place, so giving 1.90 and 0.02 would imply a precision of hundredths, which is misleading given the actual scatter and the measurement resolution. The data do not justify such a small uncertainty.

Option 4: best estimate = 1.90 g/cm^3 ; uncertainty = 0.04 g/cm^3
This reports a mean of 1.90 (same as 1.9) with an uncertainty around 0.04. The standard error of the mean for these five measurements is s/√n where s ≈ 0.1 (the sample standard deviation considering deviations −0.1, −0.1, 0, 0.1, 0.1 gives s ≈ 0.1), so the standard error is about 0.1/√5 ≈ 0.045, which rounds to 0.04. This approach reflects the precision of the mean itself rather than the spread of individual measurements and is a reasonable estimate, though some curricula prefer the half-range for uncertainty when quoting a single value with its precision.

In summary, each option uses a different convention for reporting uncertainty. The choice of method affects how confidently we present the best estimate and how wide the stated uncertainty is. The key ideas are: determine a central value from the measurements (often the mean), and quantify spread using a consistent method (half the range, standard deviation, or standard error), with the chosen method aligning to the context and instruction.

SPHY001 LAB 6 (Pre-Lab) How to Write the Conclusion of a Laboratory Report | LA010

A student measures the density of a liquid five times and gets the results (all in gram/cm3 ) 1.8, 2.0, 2.0, 1.9, and 1.8. What would you suggest as the best estimate and uncertainty based on these measurements?

查看解析

登录即可查看完整答案

类似问题

Each of the two research groups discovers a new elementary particle. The two reported masses are: m1 = (7.8 ± 0.1) × 10-27 kg m2 = (7.0 ± 0.2) × 10-27 kg What is the discrepancy between the two measurements? Based on the reported masses, would you say they are likely to be the same particle?

Two students measured the length of the same rod and reported the results 135 ± 3 mm and 137 ± 3 mm. What is the discrepancy between the two measurements, and is it significant?

Rewrite the following result in its clearest forms (Best Estimate ± Uncertainty) and scientific notation, with suitable numbers of significant figures in the uncertainty and decimal places in the best estimate: 𝑣 = ( 238965 ± 47 ) 𝑚 / 𝑠 =

What is the uncertainty [Fill in the blank], °C indicated by this thermometer? (Only add the numerical value here, do not add +/- or the units) Hint: only 1 sig fig can be used for uncertainty unless the first sig fig starts with a 1. Open this image in a new tab if your image does not load

What is the uncertainty for this measurement [Fill in the blank], cm. The numbers shown on the tape are in cm. (Only add the numerical value here, do not add +/- or the units) Open this image in a new tab if your image does not load

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单