Dynamic random-access memory (DRAM) memory chips are made from silicon wafers in manufacturing facilities through a very complex process called wafer fabs. The wafers are routed through the fab machines in an order that is referred to as a recipe. The wafers may go through the same machine several times as the chip is created. The data file DRAM Chips
Download DRAM Chips
contains a sample of processing times, measured in fractions of hours, at a particular machine center for one chip recipe.

Compute the mean processing time.

Question

Dynamic random-access memory (DRAM) memory chips are made from silicon wafers in manufacturing facilities through a very complex process called wafer fabs. The wafers are routed through the fab machines in an order that is referred to as a recipe. The wafers may go through the same machine several times as the chip is created. The data file DRAM Chips 
Download DRAM Chips
contains a sample of processing times, measured in fractions of hours, at a particular machine center for one chip recipe.

Compute the mean processing time.

BlackTom AI · Accepted Answer

To tackle this question, I start by restating what is being asked and what information is available. The problem asks to compute the mean processing time for DRAM chip fabrication, given that the times are measured in fractions of hours and that a data file titled DRAM Chips contains a sample of processing times at a particular machine center for one chip recipe. The answer options present times in minutes. However, the actual numeric data values from the sample are not provided in the prompt, so a precise numerical mean cannot be computed from what is given here.

Option 0.22 minutes: This value is expressed in minutes, but since the data are described as fractions of hours, any mean derived from those data would originally be in hours. If one were to convert a mean from hours to minutes, multiply by 60. Therefore, 0.22 minutes would correspond to 0.003666... hours, which is a very small mean in the context of wafer processing times. Whether this is plausible depends entirely on the actual sample values; without them, we cannot verify.

Option 0.24 minutes: Like the previous option, this is a small number in minutes. Converting back, 0.24 minutes equals 0.004 hours. This would imply an extremely short mean processing time per operation, which seems unlikely for wafer fabrication steps that typically involve longer durations. Yet again, verification requires the sample data values.

Option 0.33 minutes: This is another small-minute value. Converting to hours, 0.33 minutes is 0.0055 hours. As with the prior two options, the plausibility depends on the actual sample; however, given that the times are specified as fractions of hours, any mean presented in minutes must be consistent with a corresponding mean in hours when back-converted.

Option 0.31 minutes: This is slightly larger than the other minute-based choices, equating to 0.005166... hours. The same unit-consistency check applies: the mean in hours would be this value divided by 60, and you’d need the original hour-based mean to assess plausibility.

Key conceptual point: when data are stated as fractions of hours, the natural unit for the mean is hours. If a question wants the mean shown in minutes, you must convert the mean hours to minutes by multiplying by 60. Any presented value in minutes should correspond to 60 times the mean in hours. Since the actual sample values are not provided here, we cannot perform the conversion and compute the exact numeric mean.

Another important consideration is whether the problem statement’s wording implies that the mean should be reported in minutes after converting from hours, or whether the raw mean in hours is what should be reported. The discrepancy between the data unit (fractions of hours) and the answer options (minutes) creates a need to clarify the expected unit of the final result before performing any calculation.

In summary, due to the absence of the actual sample data values, a precise mean cannot be determined from the information given. The presence of minute-based options suggests a unit conversion step is expected, but without the underlying hour-based mean, we cannot verify which of these options, if any, correctly represents the mean. The key pitfall to avoid is reporting a mean in minutes without ensuring it aligns with the hour-based nature of the data after applying the correct 60-minute-per-hour conversion.

OSC 2030-009 Fall 2025 SUBMIT: Graded Homework Module 2 (Chap 3)

查看解析

登录即可查看完整答案

类似问题

Question at position 3 What is the output of the following code? x = c(0, 1, 1, 2, 3, 5, 8, 13, 21, 34)mean(x) 8.89.510.515.0

Refer to sheet A4Q3-6 Calculate the average bonus for all people surveyed. Exclude people who did not receive a bonus. Round your answer to two decimal places.

The average value of a set of numbers is known as which of the following?

Calculating the Mean: Using the same table from the previous question, calculate the mean (average) of the back grade (bgrade). You don’t need to compute this using SQL—simply apply the mean() function on the column in R. Question: What is the overall mean for the back part of the exam?

Question textA class of 21 students were asked their age (in years). Their responses are in the EXCEL file ClassAges.xlsx (Download and open this file). Use Excel to calculate the mean age of this group. Give your answer to 2 decimal places. Answer 1 Question 5[input]

Find the mean of the data 9,5.6,6.1,7.6,4.89,5.6,6.1,7.6,4.8.Use two decimal digits after the decimal point.

The sum of the deviations of each data value from this measure of central location will always be zero.

Which of the following is the mathematical average of a set of scores?

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单