A 243-turn circular coil of radius 30 cm is placed in a spatially uniform magnetic field with its axis parallel to the magnetic field lines. The magnetic field is changing temporally at a rate of -0.04 T/s i.e., dB/dt = -0.04 T/s.

The resistance of the coil is 6.3 Ω.

What is the magnitude of the current circulating through the coil?

Neglect the effect of Earth’s magnetic field.

Calculate your answer in the units of ampere (A).

Write your answer in decimal form with two digits to the right of the decimal point (e.g. 5.32); do not write any units.

Question

A 243-turn circular coil of radius 30 cm is placed in a spatially uniform magnetic field with its axis parallel to the magnetic field lines. The magnetic field is changing temporally at a rate of -0.04 T/s i.e., dB/dt = -0.04 T/s.

The resistance of the coil is 6.3 Ω.

What is the magnitude of the current circulating through the coil?

Neglect the effect of Earth’s magnetic field.

Calculate your answer in the units of ampere (A).

Write your answer in decimal form with two digits to the right of the decimal point (e.g. 5.32); do not write any units.

BlackTom AI · Accepted Answer

Let’s begin by identifying the key quantities involved in this induction problem. The coil has N = 243 turns and radius r = 0.30 m, so its cross-sectional area is A = π r^2 = π × (0.30)^2 = π × 0.09 ≈ 0.282743 m^2.

Because the coil’s axis is parallel to the magnetic field lines, the magnetic flux through the coil is Φ = B A (the normal to the coil is aligned with B), so the rate of change of flux is dΦ/dt = A dB/dt. If the magnetic field changes at a rate of dB/dt = -0.04 T/s, the magnitude of the induced electromotive force (emf) in a coil with N turns is |ε| = N |dΦ/dt| = N A |dB/dt|.

Plugging in the numbers: |ε| = 243 × 0.282743 × 0.04. To simplify the multiplication, multiply A by dB/dt first: 0.282743 × 0.04 ≈ 0.0113097. Then multiply by N: 0.0113097 × 243 ≈ 2.748 V (units of volts, but we are focusing on magnitude for current calculation).

The coil has a resistance R = 6.3 Ω. By Ohm’s law, the induced current magnitude is I = |ε| / R = 2.748 / 6.3. Performing this division gives I ≈ 0.436 A.

In summary, the sequence is: compute area from radius, relate emf to dB/dt via N and area, then apply Ohm’s law with the given resistance to obtain the current. This approach uses Faraday’s law for a tightly wound, single-loop-like coil and the basic resistance relation, ensuring units are consistent throughout the steps.

Note: Throughout the calculation, only the magnitude of the emf and current is considered, since the question asks for the magnitude of the current.

ENGR-217:201,202,203,204,501,502,505,506,515,516,521,522,523,524,525,526,535,536,PHYS-217:203,204,501,502,503,531,532,533 Final Exam

查看解析

登录即可查看完整答案

类似问题

A circular coil with an area of 0.0500 m2 is wrapped with 500 turns of wire and is placed in a uniform magnetic field perpendicular to its plane. If the field changes in value from -0.100 T to +0.150 T in an interval of 0.500 s, what is the magnitude of the average voltage induced in the coil?

As a magnet is moved within a coil, the rate of change of the magnet field is proportional to the coil's induced (output) voltage. This describes which law?

A flat square coil of wire with 15 turns and an area of 0.40 m2 is placed with the plane of its area parallel to a magnetic field of 0.75 T. The coil is flipped so its plane is perpendicular to the magnetic field in a time of 0.050 s. What is the magnitude of the average induced emf in the coil?

The point lies on the terminal arm of an angle in standard position. What are the correct values of the following three ratios?

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单