Which of the factors does not belong to the possible environmental factors contributing to the sources of error in a laboratory?

Question

BlackTom AI · Accepted Answer

In tackling the question about environmental factors contributing to sources of error in a laboratory, I’ll evaluate each option for its relation to the environment as opposed to an instrumental practice.
Option 1: Electronic noise. This is typically associated with the electronic hardware and detectors, and while it can be influenced by environmental conditions (e.g., electromagnetic interference), it is mainly an instrument-related or system-level issue rather than an environmental factor per se. It highlights how the surroundings can contribute indirectly, but the core source is within the instrument’s electronics rather than the environment.
Option 2: Changes in temperature. Temperature is a classical environmental factor. Fluctuations in ambient temperature can affect reaction rates, instrument drift, solution viscosity, and sensor performance, all of which can introduce measurement error. This fits squarely as an environmental contributor to error.
Option 3: Failure to calibrate or check the zero of the instrument. This describes a procedural or instrumental maintenance practice. It is about ensuring the instrument is correctly set up and zeroed, which is not an environmental factor but an action related to instrument calibration. Therefore, this option is not an environmental factor.
Option 4: Vibrations. Mechanical vibrations from HVAC systems, nearby equipment, or building activity count as environmental disturbances. They can translate into measurement noise or unstable readings, making this a bona fide environmental contributor to error.
Across these options, we see a mix of environmental versus non-environmental considerations. Electronic noise and vibrations are tightly connected to the environment or external influences on the setup, while temperature changes are a classic environmental condition affecting measurements. Calibration-related failures are procedural/instrumental rather than environmental. Consequently, the item that does not belong as an environmental factor is the calibration-related option, since it describes an action on the instrument rather than an environmental condition that could cause error.

SPHY001 LAB 6 (Pre-Lab) How to Write the Conclusion of a Laboratory Report | LA010

Which of the factors does not belong to the possible environmental factors contributing to the sources of error in a laboratory?

查看解析

登录即可查看完整答案

类似问题

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

The break-even point is that at which:

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单