Open-channel flow occurs in culverts operating under inlet control only.

Question

BlackTom AI · Accepted Answer

The statement asserts that open-channel flow occurs in culverts operating under inlet control only, which is not accurate. Open-channel flow in culverts can be governed by different control conditions depending on the hydraulic setup and what limits the discharge.
First, inlet control means the flow is limited by the conditions at the culvert entrance; the velocity through the culvert depth can be high while the upstream head controls the discharge. However, this is not the only possible regime. When the outlet conditions or the downstream tailwater depth control the flow, the culvert is under outlet control, and the discharge is restricted by the downstream geometry and tailwater.
Second, there is also the possibility of a situation where the culvert operates under a neutral or through-flow regime where neither inlet nor outlet completely dominates, and the actual flow is determined by the combined hydraulic losses, entrance geometry, and tailwater interaction. Therefore, insisting that open-channel flow always occurs under inlet control ignores these other valid scenarios.
Third, practical culvert design and analysis often involve evaluating both inlet and outlet control cases to determine the range of possible discharges and to identify which condition governs for a given upstream and downstream setup.
Fourth, if the upstream water surface rises while tailwater remains low, inlet control might govern; if tailwater rises or the downstream channel imposes limitations, outlet control becomes governing. In short, open-channel flow is not restricted to inlet control alone; multiple control conditions can govern depending on the boundary conditions and flow regime.
Thus, the claim that open-channel flow occurs only under inlet control is false because outlet control and mixed or neutral conditions can and do occur in culverts as well.

ENGR3851_2025_S1_TON

Open-channel flow occurs in culverts operating under inlet control only.

查看解析

登录即可查看完整答案

类似问题

M1Q4 A culvert runs in inlet control when ...

Full-flow is a possible flow condition for culverts under inlet control.

Full-flow is a flow condition that only exists in culverts operating under outlet control.

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单