Which of the following charts have upper control limits, but frequently have lower control limits of zero?

Question

BlackTom AI · Accepted Answer

Question restatement: The prompt asks which charts have upper control limits (UCL) but frequently have lower control limits (LCL) of zero.
Option 1: c and u charts. These charts focus on defect counts per item or per unit, with LCL typically at or near zero in many practical applications, and they do have an upper control limit in some cases. However, the characteristic described—a frequently zero LCL—is more strongly associated with range-based and variability charts rather than defect-count charts. This option is partially plausible but not the strongest or clearest match for the given phrasing.
Option 2: p and np charts. These are proportion-based charts where UCLs exist and LCLs can be zero if the observed proportion is very small or zero. In practice, many p-chart calculations do yield a zero LCL under certain conditions, so this option could fit the criterion. Nevertheless, the wording of the question emphasizes charts where the LCL is frequently zero due to the fundamental non-negativity of the statistic, which is a more defining feature for range and dispersion charts.
Option 3: x-bar and individuals charts. The x-bar chart has both an upper and lower control limit around the process mean, and the individuals chart (I-chart) also has limits; however, their LCLs are not inherently zero and can be positioned below the process mean depending on data and subgrouping. Therefore, this pair does not align with the described frequent LCL of zero.
Option 4: R and sigma charts. Here, the R chart controls dispersion by the range, which cannot be negative, making its LCL effectively zero in many setups. The sigma (or s) chart tracks standard deviation, which also cannot be negative, leading to a natural LCL of zero in standard practice. Both charts inherently feature an upper control limit and a lower limit that is zero or effectively zero, matching the described characteristic very clearly.
In summary, while several options involve charts with LCLs that can be zero under certain conditions, the combination of R and sigma charts most consistently embodies the explicit combination of having an upper control limit while frequently having a lower control limit of zero, due to the nonnegative nature of range and standard deviation. The other options either do not consistently exhibit a zero LCL, or their typical LCL behavior does not align as cleanly with the description.

ISE 4120 SP2025 (10663) QCI Chapter 9 Quiz

Which of the following charts have upper control limits, but frequently have lower control limits of zero?

查看解析

登录即可查看完整答案

类似问题

To depict average cost per meal, including an upper and lower limit, it would be best to use a:

A small juice bottling startup wants to monitor the consistency of 3-ounce bottles. Five samples of 3 bottles each were measured (in ounces), what are the control limits for the R-chart? Sample Bottle 1 Bottle 2 Bottle 3 1 3 3 3 2 3 3 2 3 2 2 3 4 3 3 3 5 2 3 2

A small juice bottling startup wants to monitor the consistency of 3-ounce bottles. Five samples of 3 bottles each were measured (in ounces), what are the control limits for the R-chart? Sample Bottle 1 Bottle 2 Bottle 3 1 3 3 3 2 3 3 2 3 2 2 3 4 3 3 3 5 2 3 2

What is the main difference between C-chart and P-chart?

What is the main difference between C-chart and P-chart?

Compared to attribute control charts, variable control charts are more informative because they:

Attribute control charts differ from variable control charts because they:

The defect rate for a product has historically been about 2.0%. What are the upper and lower control chart limits if you wish to use a sample size of 100 and 3-sigma limits? All answers are in (LCL,UCL) format.

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单