The defect rate for a product has historically been about 2.0%. What are the upper and lower control chart limits if you wish to use a sample size of 100 and 3-sigma limits? All answers are in (LCL,UCL) format.

Question

BlackTom AI · Accepted Answer

We’re dealing with a p-chart style calculation for a defect rate, using the historical proportion p0 = 0.02 and a sample size n = 100 with 3-sigma limits.
First, compute the standard error term: sqrt[p0(1 - p0) / n] = sqrt[0.02 * 0.98 / 100] = sqrt[0.0196 / 100] = sqrt[0.000196] ≈ 0.0140.
Then, multiply by 3 to obtain the margin of control: 3 * 0.0140 ≈ 0.042.
Now, find the upper and lower control limits using p0 ± 3*standard_error:
- Lower Control Limit (LCL) = p0 − 3*SE ≈ 0.02 − 0.042 ≈ −0.022. Since a defect rate cannot be negative, the LCL is set at 0.00.
- Upper Control Limit (UCL) = p0 + 3*SE ≈ 0.02 + 0.042 ≈ 0.062.
Thus the practical limits are (0.00, 0.062).
Option-by-option analysis:
- Option (0.00, 0.062): This matches the calculated LCL and UCL exactly after applying the non-negativity floor on the LCL. Correct considering the standard error and 3-sigma spread.
- Option (0.00, 0.059): The UCL would require a margin of 0.039, which implies a smaller SE than computed; this would occur if the SE were 0.013, not 0.014, which is inconsistent with the given p0 and n.
- Option (0.00, 0.048): An even smaller UCL of 0.048 would require a margin of 0.028, corresponding to an SE around 0.0093, far from the calculated 0.014.
- Option (0.00, 0.067): A UCL of 0.067 implies a margin of 0.047, implying a larger SE than the actual 0.014; this overstates the variability.
In summary, only (0.00, 0.062) aligns with the standard 3-sigma calculation using p0 = 0.02 and n = 100, with the LCL adjusted to zero whenever the raw calculation would yield a negative value.

MGS310001.2025FA Test 01: MGS3100

The defect rate for a product has historically been about 2.0%. What are the upper and lower control chart limits if you wish to use a sample size of 100 and 3-sigma limits? All answers are in (LCL,UCL) format.

查看解析

登录即可查看完整答案

类似问题

To depict average cost per meal, including an upper and lower limit, it would be best to use a:

A small juice bottling startup wants to monitor the consistency of 3-ounce bottles. Five samples of 3 bottles each were measured (in ounces), what are the control limits for the R-chart? Sample Bottle 1 Bottle 2 Bottle 3 1 3 3 3 2 3 3 2 3 2 2 3 4 3 3 3 5 2 3 2

A small juice bottling startup wants to monitor the consistency of 3-ounce bottles. Five samples of 3 bottles each were measured (in ounces), what are the control limits for the R-chart? Sample Bottle 1 Bottle 2 Bottle 3 1 3 3 3 2 3 3 2 3 2 2 3 4 3 3 3 5 2 3 2

What is the main difference between C-chart and P-chart?

What is the main difference between C-chart and P-chart?

Compared to attribute control charts, variable control charts are more informative because they:

Attribute control charts differ from variable control charts because they:

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单

MGS*3100*01.2025FA Test 01: MGS3100

The defect rate for a product has historically been about 2.0%. What are the upper and lower control chart limits if you wish to use a sample size of 100 and 3-sigma limits? All answers are in (LCL,UCL) format.

查看解析

登录即可查看完整答案

类似问题

To depict average cost per meal, including an upper and lower limit, it would be best to use a:

A small juice bottling startup wants to monitor the consistency of 3-ounce bottles. Five samples of 3 bottles each were measured (in ounces), what are the control limits for the R-chart? Sample Bottle 1 Bottle 2 Bottle 3 1 3 3 3 2 3 3 2 3 2 2 3 4 3 3 3 5 2 3 2

A small juice bottling startup wants to monitor the consistency of 3-ounce bottles. Five samples of 3 bottles each were measured (in ounces), what are the control limits for the R-chart? Sample Bottle 1 Bottle 2 Bottle 3 1 3 3 3 2 3 3 2 3 2 2 3 4 3 3 3 5 2 3 2

What is the main difference between C-chart and P-chart?

What is the main difference between C-chart and P-chart?

Compared to attribute control charts, variable control charts are more informative because they:

Attribute control charts differ from variable control charts because they:

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单

MGS310001.2025FA Test 01: MGS3100