A river 935 m wide and 3.5 m deep, flowing at 1.5 m sec-1 enters narrow canyon 55 m wide and 15 m deep. What is the average river speed in the canyon assuming its cross section is a elliptical? The area of an ellipse is π a b, where a and b are the two axes of the ellipse.

Question

A river 935 m wide and 3.5 m deep, flowing at 1.5 m sec-1 enters narrow canyon 55 m wide and 15 m deep.  What is the average river speed in the canyon assuming its cross section is a elliptical?  The area of an ellipse is π a b, where a and b are the two axes of the ellipse.

BlackTom AI · Accepted Answer

We start by recognizing the principle of conservation of flow (volume rate of flow) between the upstream river and the canyon:
Q = v1 * A1 = v2 * A2
Where:
v1 = 1.5 m/s is the upstream velocity,
A1 is the upstream cross-sectional area, and
v2 is the average speed in the canyon with cross-sectional area A2.

1) Upstream cross-sectional area A1:
The upstream cross section is essentially rectangular with width 935 m and depth 3.5 m, so A1 = 935 * 3.5 = 3272.5 m^2.

2) Canyon cross-sectional area A2:
The canyon cross section is given as elliptical with width 55 m and depth 15 m. For an ellipse, the area is A = π a b, where a and b are the semi-axes. If the width is 55 m, then the horizontal semi-axis a = 55/2 = 27.5 m. If the depth is 15 m, then the vertical semi-axis b = 15/2 = 7.5 m. Thus A2 = π * a * b = π * 27.5 * 7.5.
Compute A2: 27.5 * 7.5 = 206.25, and multiplying by π (~3.1416) gives A2 ≈ 647 m^2.

3) Compute Q using upstream values:
Q = v1 * A1 = 1.5 m/s * 3272.5 m^2 = 4908.75 m^3/s.

4) Find v2 in the canyon:
v2 = Q / A2 = 4908.75 m^3/s / 647 m^2 ≈ 7.58 m/s.

Summary:
- Upstream cross-sectional area A1 = 3272.5 m^2
- Canyon cross-sectional area A2 ≈ 647 m^2
- Flow rate Q ≈ 4908.75 m^3/s
- Canyon speed v2 ≈ 7.6 m/s

Note on the provided answer: The calculation above yields approximately 7.6 m/s. The given answer of 6 m/s appears inconsistent with the standard conservation-of-flow approach using the stated geometry (elliptical canyon cross-section with a = 27.5 m and b = 7.5 m). Depending on rounding choices or a different interpretation of the elliptical dimensions, results may vary slightly, but 7.6 m/s is the direct consequence of the stated dimensions and the continuity equation.

A river 935 m wide and 3.5 m deep, flowing at 1.5 m sec-1 enters narrow canyon 55 m wide and 15 m deep. What is the average river speed in the canyon assuming its cross section is a elliptical? The area of an ellipse is π a b, where a and b are the two axes of the ellipse.

查看解析

登录即可查看完整答案

类似问题

Water is flowing out of the nozzle (2) into atmospheric pressure (101 kPa). What is the flow velocity at point (1), when flow rate is 33.26 m3/h? Round off the answer to one decimal digit in m/s, but enter the answer without the unit.

Flow velocity of water in pipe 1 is 4 m/s. Calculate the flow velocity in pipe 2. Round off the answer to one decimal digit in m/s, but enter your answer without the unit.

Flow is steady, when

A closed container with volume V receives two input flows with velocities w1 ja w2. There is also an outlet flow with velocity w3. Which of the following equations would you use to solve the rate of change of water level in the container?

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单