A process consists of five machines producing a metal part. The parts move in sequence from Machine 1 to Machine 5. Processing at Machine 1 takes 10 seconds then the parts move to Machine 2 where processing takes 15 seconds. In Machine 3, the processing takes 12 seconds and in Machine 4, the processing takes 20 seconds. The parts finally move to Machine 5 where processing takes 18 seconds. Which machine in this process is the bottleneck machine?

Question

A process consists of five machines producing a metal part. The parts move in sequence from Machine 1 to Machine 5. Processing at Machine 1 takes 10 seconds then the parts move to Machine 2 where processing takes 15 seconds. In Machine 3, the processing takes 12 seconds and in Machine 4, the processing takes 20 seconds. The parts finally move to Machine 5 where processing takes 18 seconds.  Which machine in this process is the bottleneck machine?

BlackTom AI · Accepted Answer

To identify the bottleneck in a sequential flow, we compare the processing times at each machine, since the bottleneck is the station that takes the longest to process a part and thus limits the overall throughput.
Option: Machine 1
- Processing time at Machine 1 is 10 seconds. This is relatively short compared to other machines, so Machine 1 is unlikely to be the bottleneck because it does not impose the maximum delay on the flow.
Option: Machine 2
- Processing time at Machine 2 is 15 seconds. While longer than Machine 1, this duration is still less than the longest observed time among all machines, so this machine does not cap the process rate.
Option: Machine 3
- Processing time at Machine 3 is 12 seconds. This is not the largest time among the machines, so it would not typically set the overall pace of production when others process longer.
Option: Machine 4
- Processing time at Machine 4 is 20 seconds, which is the highest processing time among all five machines. When one station has the greatest dwell time, it tends to be the bottleneck, as it slows the downstream flow more than any other station.
Option: Machine 5
- Processing time at Machine 5 is 18 seconds. Although substantial, it is still shorter than the 20-second duration at Machine 4, so it does not impose the slowest step in the sequence.
In summary, the comparison shows a monotonic ranking of processing times: 10, 15, 12, 20, 18 seconds. The largest value is 20 seconds at Machine 4, which means this station dictates the slowest part of the overall process and thus acts as the bottleneck in the sequence.

SCHM2301.60549.202560 Assessment Survey

查看解析

登录即可查看完整答案

类似问题

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

The break-even point is that at which:

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单