What is the minimum assignable speed to aircraft operating between FL 280 and 10,000 feet,

Question

BlackTom AI · Accepted Answer

Question restatement: What is the minimum assignable speed to aircraft operating between FL 280 and 10,000 feet?

Observation about options: The provided data shows a single answer: "not less that 250 (or Mach equivalent)" but there is no list of answer choices to evaluate beyond that. This means we can only reason about the given option and the general principle behind speed restrictions for the given altitude band.

Option under analysis: "not less that 250 (or Mach equivalent)". Interpreting this, the statement asserts a lower speed bound of 250 knots indicated airspeed (KIAS) or its Mach equivalent when flight levels range from FL280 down to 10,000 feet. In flight operations, speed constraints are often driven by airway and separation requirements, performance limitations, and regulatory rules that tie speeds to altitude bands.

Reasoning about the altitude band: The range from FL280 (approximately 28,000 feet) down to 10,000 feet spans a transition from high-altitude, Mach-dominated operation to low-altitude regimes where indicated airspeed limits (like the common 250 knots below 10,000 feet) tend to apply for noise and safety. While many jurisdictions enforce a 250 KIAS maximum below 10,000 feet, a minimum assignable speed is a different concept—typically associated with safe climb, descent, maneuvering, and stall/spin avoidance rather than a blanket minimum across altitude bands. In some contexts, there may be minimum Mach numbers or minimum indicated speeds to ensure controllability at high altitude or during procedures, but those minima are often defined by performance charts, airway design, and aircraft certification rather than a single universal threshold.

On this option specifically:
- The phrase "not less than 250 knots or Mach equivalent" implies a lower bound on speed. If we interpret Mach equivalent, the exact Mach value would depend on altitude and temperature, meaning the equivalent Mach at FL280 could differ from the equivalent Mach at 10,000 feet. This adds complexity to applying a single numeric minimum across the entire band.
- The statement does not account for aircraft type, configuration, or phase of flight (climb, cruise, descent, approach), all of which can affect the appropriateness or applicability of a fixed minimum speed.
- The absence of other options prevents a comparative critique (e.g., whether 250 knots is too high or too low for certain segments, or whether a different value would be more appropriate).

Potential misconceptions to watch for:
- Misinterpreting a maximum speed limit as a minimum. An airway or regulatory rule might cap speed below a certain value, but a minimum speed constraint would be unusual to mandate universally unless tied to stall margins or performance guarantees.
- Assuming a single minimum applies indiscriminately across all aircraft and configurations. In practice, minimum operating speeds are often scenario-specific (e.g., clean configuration, gear/flaps, engine is a factor, etc.).

Putting it together: The statement presents a plausible lower bound tied to common regulatory practice below 10,000 feet, but its universal applicability across the entire FL 280 to 10,000 feet band would require context about the applicable regulatory regime and aircraft performance. The lack of additional options means we cannot contrast this against other potential statements that might refine or contradict the lower bound.

In summary, the claim asserts a prima facie sensible lower speed bound (250 knots or its Mach equivalent) for the stated altitude range, but full validation would require more context about the governing airspace rules, aircraft performance, and flight phase.

AT 405 Module 17 - Pop

What is the minimum assignable speed to aircraft operating between FL 280 and 10,000 feet,

查看解析

登录即可查看完整答案

类似问题

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

The break-even point is that at which:

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单