Leading edge devices and trailing edge flaps are normally operated by

Question

BlackTom AI · Accepted Answer

Question focuses on which system typically operates leading edge devices and trailing edge flaps.
Option 1: 'Magic' — obviously not a real or applicable power source for aircraft control surfaces; this is a distractor and incorrect.
Option 2: 'Electrical power' — while electrical systems can actuate some components, leading edge devices and flaps are traditionally hydraulic for the force and speed required on most aircraft, making this choice unlikely and inaccurate in standard configurations.
Option 3: 'Hydraulic system B' — this is the configuration commonly assigned to high-load, critical flight-control surfaces such as leading edge devices and trailing edge flaps, providing the necessary hydraulic power and redundancy.
Option 4: 'Hydraulic system A' — while hydraulic systems A and B may both exist on an aircraft, the prompt specifies that the leading edge devices and trailing edge flaps are normally operated by the other system (system B in this context), so this option does not align with the standard arrangement described.
In summary, incorrect options fail due to implausible power sources (Magic), incomplete suitability (Electrical power), or misattributing the standard system assignment (Hydraulic system A). The option that aligns with the typical high-load hydraulics role for these surfaces is Hydraulic system B.

AS 411 Lesson 13 Quiz

Leading edge devices and trailing edge flaps are normally operated by

查看解析

登录即可查看完整答案

类似问题

Leading edge devices can be retracted by the standby hydraulic system

In the event of hydraulic system B failure, the trailing edge flaps .

can operate the rudder.

The alternate brake system is powered by the ______ hydraulic system

Which of the following is not powered by both hydraulic system A and B

Each main hydraulic system has an engine driven pump and an electric pump.

The B 737 has ______ sources of 3000 psi hydraulic pressure

What component on the A340-500 provides hydraulic pressure to the Swivel Selector Valve if the primary supply fails?

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单