Leading edge devices can be retracted by the standby hydraulic system

Question

BlackTom AI · Accepted Answer

The statement to evaluate is: 'Leading edge devices can be retracted by the standby hydraulic system.'

First, consider what standby hydraulic systems are typically used for in aircraft. Standby hydraulics are generally provided to support essential or backup functions in case the primary hydraulic system fails. These systems often power critical controls or flight-safety-related components, but not routinely the normal primary flight control surfaces.

Next, examine leading edge devices (such as slats) and how they are actuated. In most aircraft, leading edge devices are controlled by the primary hydraulic system or dedicated actuation circuits that are part of the normal flight-control hydraulics. Their retraction and extension are tied to flight-control logic and aircraft systems that rely on primary hydraulic power, not the standby system.

Therefore, the idea that leading edge devices can be retracted by the standby hydraulic system contradicts the typical design and purpose of standby hydraulics, which is to support essential systems in abnormal or degraded hydraulic conditions, not to control standard, non-emergency surface movement.

Some pilots or maintenance explanations might suggest limits or exceptions for specific aircraft types, but in general aviation training and standard practice indicate that standby hydraulics do not handle the retraction of leading edge devices.

In summary, the claim is incorrect because leading edge device actuation is normally powered by the primary hydraulic system or dedicated control circuits, while standby hydraulics serve backup, essential-system roles rather than routine surface retraction.

AS 411 Exam 03

Leading edge devices can be retracted by the standby hydraulic system

查看解析

登录即可查看完整答案

类似问题

In the event of hydraulic system B failure, the trailing edge flaps .

can operate the rudder.

The alternate brake system is powered by the ______ hydraulic system

Which of the following is not powered by both hydraulic system A and B

Each main hydraulic system has an engine driven pump and an electric pump.

The B 737 has ______ sources of 3000 psi hydraulic pressure

Leading edge devices and trailing edge flaps are normally operated by

What component on the A340-500 provides hydraulic pressure to the Swivel Selector Valve if the primary supply fails?

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单