Approximately what technology node the physical gate length became larger than the number given in the technology node?

[Fill in the blank]
nm

Question

Approximately what technology node the physical gate length became larger than the number given in the technology node?
 
[Fill in the blank]
 nm

BlackTom AI · Accepted Answer

This is a fill-in-the-blank question asking for the approximate technology node where the physical gate length ended up exceeding the nominal node value.

First, recall what the technology node represents: it is largely a marketing and historical term that roughly correlates to feature sizes but does not map directly to an exact physical gate length. In earlier generations, as manufacturing techniques advanced, the advertised node often referred to a guess of overall lithographic capability rather than a precise gate length.

Next, consider the trend: as process nodes shrink from, say, 28 nm down to sub-20 nm ranges, the minimum practical transistor gate length does not reduce linearly with the node name. Process variations, device architecture (such as FinFET implementations), and the desire to maintain performance and reliability lead to actual gate lengths that are not exactly equal to the node label. In many discussions of industry trends, there is an observation that around the 16 nm node, the actual physical gate length tends to exceed the nominal node value due to these definitional shifts and lithographic realities.

Therefore, when filling the blank about the approximate node where the physical gate length becomes larger than the nominal node number, the commonly cited reference point is around 16 nm. This reflects the broader notion that the node name diverges from the true physical dimensions as you move through the more aggressively scaled generations.

If you were comparing different node generations, you would look for the point at which publication notes start to emphasize that the measured minimum gate length or critical dimension is larger than the advertised node label, which is a hallmark of the non-linear mapping between node names and physical dimensions in modern CMOS technology.

EESM5200 (L2) Part II: Topic 9 - Transistor Scaling

Approximately what technology node the physical gate length became larger than the number given in the technology node? [Fill in the blank] nm

View Explanation

Log in for full answers

Similar Questions

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

The break-even point is that at which:

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler