How many BTU's does it take to heat 9,857 gallons of water from 60 F to 67 F?

Question

BlackTom AI · Accepted Answer

To determine how many BTUs are needed to heat water, we use the formula Q = m × c × ΔT, where
- Q is heat energy in BTUs,
- m is the mass of the water in pounds (lb),
- c is the specific heat capacity of water (about 1 BTU per pound per degree Fahrenheit), and
- ΔT is the change in temperature in degrees Fahrenheit.

Step 1: Convert gallons to pounds. The mass of water per gallon is roughly 8.34–8.345 lb. Using a typical value of 8.345 lb/gal, the total mass is:
Mass m = 9857 gal × 8.345 lb/gal ≈ 82,256.7 lb.

Step 2: Compute the temperature rise. The water rises from 60 °F to 67 °F, so ΔT = 67 − 60 = 7 °F.

Step 3: Multiply to find BTUs. With c ≈ 1 BTU/lb·°F, the required heat is:
Q = m × c × ΔT ≈ 82,256.7 lb × 1 BTU/lb·°F × 7 °F ≈ 575,796.9 BTU.

Step 4: Consider rounding variations. Because the exact pound-per-gallon value for water can vary slightly (commonly taken as 8.34–8.345 lb/gal), the final BTU value will vary a bit. If we use 8.34 lb/gal, m ≈ 82,170 lb and Q ≈ 575,190 BTU. The result can plausibly land around 575,400 BTU when rounded to the nearest hundred or so.

Step 5: Compare with the given numeric result. The provided value (575,420 BTU) falls in line with the above calculations, given typical rounding and the minor differences in the exact conversion factor from gallons to pounds. Any answer in the vicinity (approximately 575,000 BTU) would be considered reasonable depending on the exact density used.

Notes and caveats:
- If a different density value is used (e.g., exactly 8.34 or 8.343 lb/gal), the final BTU will shift slightly, but remain near 575k BTU for this scenario.
- This calculation assumes no heat losses and ideal heating of pure water; real-world systems may require slightly more energy due to inefficiencies.

SP25-BL-PHYS-P120-12246 7_1_6_Quiz

How many BTU's does it take to heat 9,857 gallons of water from 60 F to 67 F?

View Explanation

Log in for full answers

Similar Questions

What is the formula of the energy required to change the temperature?

It is a well-known fact that water has a higher specific heat capacity than iron. Now, consider equal masses of water and iron that are initially in thermal equilibrium. The same amount of heat flow, 300 J, is added to each. Which statement is true?

Temperature of land rises more quickly than that of sea because

Question at position 38 Water will cool ________ land.the same asslower thanfaster than

By what quantity must the heat capacity of an object be divided to obtain the specific heat of that material?

Which of the following substances has the highest specific heat?

The specific heat of silver is 0.24 . How many joules of energy are needed to warm 4.37 g of silver from 25.0C to 27.5C?

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler