For a system design, you have to create a system flowchart. What of the following is the correct order of occurrence in the system flowchart?

Question

BlackTom AI · Accepted Answer

When constructing a system flowchart, you typically start with something the system receives or captures, which is the input. From there, the system performs operations or transformations on that input, which is the processing step. After processing, the results are produced and shown to users or other systems, which is the output. If there is a need to improve or adapt the system, feedback loops can be used to feed information back into the process for adjustments, making the feedback a later stage that can influence future iterations.

Option A: Input, output, process, feedback. This order places output before processing, which is illogical because you cannot have meaningful output without first processing the input. The flow should not reach the output before processing occurs.

Option B: Input, feedback, process, output. Here feedback appears immediately after input, but feedback is typically information about the results or performance that is generated after processing and outputting results, not right after input. This disrupts the natural sequence of transforming input into useful results before considering improvement signals.

Option C: Input, process, output, feedback. This arrangement follows the standard sequence: receive input, perform processing, generate output, and then use feedback to refine future cycles. It reflects a typical control or data flow where feedback depends on the produced output.

Option D: Input, process, feedback, output. Placing feedback before the final output implies that feedback influences the processing or is applied before the results are produced, which is less conventional since feedback is usually provided after observing the output to drive adjustments.

Option E: Feedback, input, output, process. Starting with feedback contradicts the initial dataflow concept, since there is no prior output to base feedback on, and it disrupts the logical ordering of input, processing, and producing results.

In summary, the conventional order in a system flowchart that makes logical sense for a single pass through the system is input → process → output → feedback, which corresponds to Option C.

ELEC3848_2C_2024 Quiz : 30min 20th Mar, 2025 (anytime after 1:45pm)

For a system design, you have to create a system flowchart. What of the following is the correct order of occurrence in the system flowchart?

View Explanation

Log in for full answers

Similar Questions

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

The break-even point is that at which:

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler