Indicate whether each statement is True (T) or False (F).
1: If the system of equations in a FEA model results in a singular matrix, it implies that the system of equations has a unique solution
2: Deformation, strain, and internal stress of a structure under load can all be obtained using FEA
3: FEA is useful in stress analysis, heat transfer and fluid flow modelling
4: In FEA, the applied loads and displacements of a structure are used to solve for the structural stiffness
5: FEA is based on the principal that complex structures can be represented as simpler connected elements

Question

BlackTom AI · Accepted Answer

Starting with the overall concept, these statements evaluate how Finite Element Analysis (FEA) is used and what it implies.

1) 'If the system of equations in a FEA model results in a singular matrix, it implies that the system of equations has a unique solution.' This is incorrect. A singular matrix means the system either has no solution or infinitely many solutions, not a unique one. It signals issues like dependent constraints, insufficient boundary conditions, or incompatible loads.

2) 'Deformation, strain, and internal stress of a structure under load can all be obtained using FEA.' This is true. FEA computes nodal displacements from which strains and stresses can be derived, giving a full picture of deformation and internal response under loading.

3) 'FEA is useful in stress analysis, heat transfer and fluid flow modelling.' This statement is correct. FEA is widely used across multiple domains, including structural (stress/strain), heat transfer (temperature fields, thermal stresses), and fluid-structure interactions where discretization and numerical solution are employed.

4) 'In FEA, the applied loads and displacements of a structure are used to solve for the structural stiffness.' This is false as written. In FEA, the governing equation is typically K u = f, where K is the stiffness matrix, u the displacements, and f the applied loads. The stiffness is a property of the discretized system (derived from material properties and element geometry); we do not solve for K using loads and displacements. Instead, we use K and f to solve for u, or conversely, with boundary conditions, we determine reactions or displacements.

5) 'FEA is based on the principle that complex structures can be represented as simpler connected elements.' This is true. The core idea of the finite element method is to partition a complex domain into smaller, simpler elements connected at nodes to approximate the behavior of the whole system.

AMME2000 BMET2960 BMET9960 (ND) Week 13 Pre-work

View Explanation

Log in for full answers

Similar Questions

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

The break-even point is that at which:

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler