Questions
Questions

CSYE6225.17541.202610 Midterm Exam- Requires Respondus LockDown Browser

Single choice

The primary purpose of Network Address Translation (NAT) is:

Options
A.Routes packets between VPCs
B.Conserve public IPv4 addresses
C.Encrypt network traffic
D.Assign domain names
View Explanation

View Explanation

Verified Answer
Please login to view
Step-by-Step Analysis
The question asks about the primary purpose of Network Address Translation (NAT). Option 1: 'Routes packets between VPCs'—NAT does not perform inter-VPC routing. Routing between VPCs is handled by route t......Login to view full explanation

Log in for full answers

We've collected over 50,000 authentic exam questions and detailed explanations from around the globe. Log in now and get instant access to the answers!

Similar Questions

NAT : Network Address Translation  In the following home network, host 192.168.5.1 sends a HTTP request to a web server of IP address 129.112.40.6, and receives a HTTP response. Relating to this request, the NAT table at the home router has the following entry: WAN side addr WAN side port LAN side addr LAN side port 130.155.169.8 6123 192.168.5.1 3456   Complete the following table to show what you would observe at the home router's WAN interface point A and host 192.168.5.1's network interface point C. Datagram Observed at Source IP addr Source port Destination IP addr Destination port HTTP request point C [Fill in the blank] 3456 [Fill in the blank] 80 HTTP request point A [Fill in the blank] 6123 [Fill in the blank] 80 HTTP response point A [Fill in the blank] 80 [Fill in the blank] 6123 HTTP response point C [Fill in the blank] 80 [Fill in the blank] 3456  

Question13 When an IP datagram containing a transport segment is going from a private network onto the public Internet through a Network Address Translation (NAT) router, which of the following network and transport layer header fields might the router change? You can select multiple options.Select one or more alternatives Destination port number IP checksum Destination IP address Source IP address None of the provided choices Protocol field in IP header Source port number Transport checksum ResetMaximum marks: 1

A private network uses a NAPT device at public IP address 197.196.100.80 The computers in the network use addresses of the form 10.0.0.x/22. Suppose that computer inside the NATed network sends a request with  Source address:      10.0.1.10 Source port:           530 Destination address:     60.25.40.10  Destination port:          20  The next available port number on the NAPT device is 10123.   PART 1: What source and destination information do the request packet headers contain when the request is sent out by the sending host? Source address: [ Select ] 10123 60.25.40.10 530 197.196.100.80 10.0.1.10 20 Source port : [ Select ] 10123 10.0.1.10 530 60.25.40.10 197.196.100.80 20 Destination address: 60.25.40.10 Destination port : [ Select ] 10.0.1.10 530 20 197.196.100.80 10123 60.25.40.10   PART 2: What source and destination information do the request packet headers contain when the request is sent out by the NAT box? Source address: [ Select ] 60.25.40.10 20 10.0.1.10 197.196.100.80 530 10123 Source port : [ Select ] 60.25.40.10 10123 10.0.1.10 197.196.100.80 20 530 Destination address: [ Select ] 197.196.100.80 530 60.25.40.10 10.0.1.10 10123 20 Destination port : [ Select ] 10.0.1.10 60.25.40.10 10123 20 530 197.196.100.80   PART 3: What source and destination information do the response packet headers contain when the response is received by the NAT box? Source address: [ Select ] 60.25.40.10 10.0.1.10 10123 197.196.100.80 20 530 Source port : [ Select ] 60.25.40.10 20 10123 530 10.0.1.10 197.196.100.80 Destination address: [ Select ] 60.25.40.10 197.196.100.80 530 20 10.0.1.10 10123 Destination port : [ Select ] 530 60.25.40.10 10123 20 10.0.1.10 197.196.100.80   PART 4: What source and destination information do the response packet headers contain when the response is received by the original sending host? Source address: [ Select ] 197.196.100.80 20 10.0.1.10 530 60.25.40.10 10123 Source port : [ Select ] 530 60.25.40.10 20 10123 197.196.100.80 10.0.1.10 Destination address: [ Select ] 197.196.100.80 60.25.40.10 10123 530 20 10.0.1.10 Destination port : 530

NAPT devices translate IP address and port numbers.

More Practical Tools for Students Powered by AI Study Helper

Join us and instantly unlock extensive past papers & exclusive solutions to get a head start on your studies!