Two students measured the length of the same rod and reported the results 135 ± 3 mm and 137 ± 3 mm. What is the discrepancy between the two measurements, and is it significant?

Question

BlackTom AI · Accepted Answer

To tackle this question, I’ll break down what the numbers mean and compare the two measurements carefully.
Option A: '136 mm (significant)'. This choice implies that the two measurements differ by a value that is statistically meaningful and beyond the uncertainty. However, the reported measurements each have an uncertainty of ±3 mm, so a 136 mm central value is not directly relevant here; more importantly, the actual difference between 135 and 137 is 2 mm, which is smaller than the stated uncertainties. Therefore, labeling the discrepancy as significant is not justified.
Option B: '136 mm (not significant)'. Here the central value 136 mm would be a derived estimate, but the problem asks for the discrepancy between the two measurements, not a single combined value. The key question is about the difference (2 mm) and whether that difference is significant given the uncertainties. This option also shifts focus away from the actual difference, making it an incorrect framing.
Option C: '2 mm (significant)'. The raw difference between the two measurements is 2 mm (137 − 135 = 2). Yet, each measurement carries an uncertainty of ±3 mm. When comparing two measurements with uncertainties, we consider whether the difference exceeds the combined uncertainty. The combined standard uncertainty is roughly sqrt(3^2 + 3^2) ≈ 4.24 mm, or, conservatively, if you treat them as independent maximum-errors, the difference of 2 mm is well within the total uncertainty. In practical terms, 2 mm is not statistically significant given ±3 mm uncertainties, so this option is not correct.
Option D: '2 mm (not significant)'. This option correctly states the difference (2 mm) and correctly characterizes its significance relative to the given uncertainties. Since each measurement can vary by up to 3 mm, the observed 2 mm discrepancy lies within the expected range of variation, so it is not significant. This aligns with standard thinking about measurement uncertainty and discrepancy interpretation.
In summary, the correct interpretation is that the two readings differ by 2 mm, but that difference is not significant because it falls within the measurement uncertainties of ±3 mm for each measurement. The remaining options either misstate the discrepancy, misinterpret what is being compared (central value vs. difference), or wrongly assign significance to the difference based on the given uncertainties.

SPHY001 LAB 6 (Pre-Lab) How to Write the Conclusion of a Laboratory Report | LA010

Two students measured the length of the same rod and reported the results 135 ± 3 mm and 137 ± 3 mm. What is the discrepancy between the two measurements, and is it significant?

View Explanation

Log in for full answers

Similar Questions

A student measures the density of a liquid five times and gets the results (all in gram/cm3 ) 1.8, 2.0, 2.0, 1.9, and 1.8. What would you suggest as the best estimate and uncertainty based on these measurements?

Each of the two research groups discovers a new elementary particle. The two reported masses are: m1 = (7.8 ± 0.1) × 10-27 kg m2 = (7.0 ± 0.2) × 10-27 kg What is the discrepancy between the two measurements? Based on the reported masses, would you say they are likely to be the same particle?

Rewrite the following result in its clearest forms (Best Estimate ± Uncertainty) and scientific notation, with suitable numbers of significant figures in the uncertainty and decimal places in the best estimate: 𝑣 = ( 238965 ± 47 ) 𝑚 / 𝑠 =

What is the uncertainty [Fill in the blank], °C indicated by this thermometer? (Only add the numerical value here, do not add +/- or the units) Hint: only 1 sig fig can be used for uncertainty unless the first sig fig starts with a 1. Open this image in a new tab if your image does not load

What is the uncertainty for this measurement [Fill in the blank], cm. The numbers shown on the tape are in cm. (Only add the numerical value here, do not add +/- or the units) Open this image in a new tab if your image does not load

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler