HTML Documents with Embedded Objects

Use the http-ethereal-trace-4 packet trace file to answer the questions. Apply the http filter to the Wireshark trace. By looking at the information in the HTTP GET messages, answer the following questions.

Each of these three GET messages were sent to different IP addresses! Packet 10 was sent to [ans1]

Question

HTML Documents with Embedded Objects

Use the http-ethereal-trace-4 packet trace file to answer the questions. Apply the http filter to the Wireshark trace.  By looking at the information in the HTTP GET messages, answer the following questions.

Each of these three GET messages were sent to different IP addresses! Packet 10 was sent to [ans1]

BlackTom AI · Accepted Answer

Begin by understanding the task: you need to identify the destination IP address used by Packet 10 for the HTTP GET messages in a Wireshark trace, applying the http filter to narrow the view.

Step 1: Load the http-ethereal-trace-4 packet trace and apply the http filter. This step ensures that only HTTP traffic is displayed, removing unrelated packets from consideration.

Step 2: Locate the three HTTP GET messages within the filtered view. Since the prompt notes that these GETs were sent to different IP addresses, you can examine the destination field for each GET to see where the request was addressed.

Step 3: Identify Packet 10 specifically. You should examine the packet list or the detailed packet view to confirm which packet is labeled as 10. Look at its IP header information, focusing on the destination IP address (the address to which the GET was sent).

Step 4: Verify consistency with the prompt. Cross-check that the other two GET messages indeed target different destinations, confirming that Packet 10’s destination IP is unique among the trio.

Step 5: Record the destination IP observed for Packet 10. In this trace, the destination address observed for Packet 10 is 128.119.245.12.

If you need to validate further, you can click into Packet 10 and inspect the HTTP GET request line (e.g., the request URL) and the IP header to ensure that the destination IP matches the one shown in the packet’s details. This cross-check helps confirm that the correct packet and destination were identified, reducing the chance of misreading the list of GET messages.

INEF001 HTTP Wireshark Diagnostic Quiz | LA005

View Explanation

Log in for full answers

Similar Questions

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

The break-even point is that at which:

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler