The grease trap specified at Fitzroy High School building was needed in order to...

Question

BlackTom AI · Accepted Answer

The question asks about the purpose of the grease trap at Fitzroy High School building and how it functions within the waste system.
Option 1: 'trap oils in the waste water from toilets' — This is not accurate because grease traps are typically connected to kitchen effluent, not toilet waste. Toilet waste is handled by the sewer line and solids/fluid balance there, whereas oils and greases come from kitchen activities.
Option 2: 'does not trap oils, but solids' — This statement mischaracterizes a grease trap, whose primary role is to separate and trap fats, oils, and greases from the wastewater. While some solids may be retained, the core function is oil/gr grease separation, so this option is incorrect.
Option 3: 'trap oils in the waste water from the kitchen or cafeteria washing troughs' — This aligns with standard practice: grease traps are installed to capture fats, oils, and greases originating from kitchen activities and washing troughs before the effluent enters the drainage system, reducing fat buildup and blockages. This option correctly identifies the source and purpose.
Option 4: 'trap oils in the waste water from FWG's' — FWG's is not a standard reference in this context, and the statement does not describe a typical intended use of a grease trap, making it an unlikely or irrelevant option.
Option 5: 'vent foul odour generated by trapped oils' — While removing oils can help reduce some odour issues, a grease trap itself does not vent odours; its function is to separate and capture oils from wastewater. Odours are managed by ventilation and other system design, so this is not an accurate description of the trap's primary purpose.

BUIL1226 Online Exercise 5 - Water supply and waste systems

The grease trap specified at Fitzroy High School building was needed in order to...

View Explanation

Log in for full answers

Similar Questions

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

The break-even point is that at which:

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler