In fatigue failure, the crack can initiate at any location of the element, however, cracks prefer surface discontinuities.

Question

BlackTom AI · Accepted Answer

Question restatement: In fatigue failure, the crack can initiate at any location of the element, however, cracks prefer surface discontinuities.

Option 1: True
- This statement aligns with the general understanding in fatigue analysis: cracks can indeed initiate at various locations depending on material defects, residual stresses, and loading, and there is a strong tendency for initiation at surface discontinuities due to stress concentration and exposure to the tensile cyclic stresses at the surface.
- The phrase 'can initiate at any location' acknowledges that internal flaws or inclusions could also serve as initiation points, which is accurate in some scenarios.
- The addition 'cracks prefer surface discontinuities' highlights a widely observed behavior that surface defects (steps, notches, cracks at surface imperfections) are common initiation sites because the local stress intensity is higher there, especially under cyclic loading.

Option 2: False
- If someone marks this as false, they would be contradicting the well-established notion that fatigue initiation is strongly influenced by surface flaws and discontinuities, which act as stress concentrators.
- This option would imply that cracks do not preferentially start at surfaces, which contradicts empirical evidence from crack initiation studies where surfaces often initiate cracks first under many fatigue loading conditions.
- It also conflicts with practical design knowledge where surface finish and surface defects are critical factors in fatigue life prediction, reinforcing the idea that surface discontinuities are preferred initiation sites.

Final reflection on the statements:
- The combined claim that cracks can start anywhere but tend to prefer surface discontinuities captures both the possible internal initiation and the common, influential role of surface flaws in fatigue behavior.
- Therefore, the statement in Option 1 is consistent with fatigue crack initiation theory, while Option 2 contradicts established understanding by denying the surface preference.

BK10A6500 Engineering Mechanics 3 - Blended teaching 6.1.2025-20.4.2025 Quiz 8.2

In fatigue failure, the crack can initiate at any location of the element, however, cracks prefer surface discontinuities.

View Explanation

Log in for full answers

Similar Questions

In the figure, what's the area where fatigue failure originated?

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler