A flat square coil of wire with 15 turns and an area of 0.40 m2 is placed with the plane of its area parallel to a magnetic field of 0.75 T. The coil is flipped so its plane is perpendicular to the magnetic field in a time of 0.050 s. What is the magnitude of the average induced emf in the coil?

Question

A flat square coil of wire with 15 turns and an area of 0.40 m2 is placed with the plane of its area parallel to a magnetic field of 0.75 T.  The coil is flipped so its plane is perpendicular to the magnetic field in a time of 0.050 s.  What is the magnitude of the average induced emf in the coil?

BlackTom AI · Accepted Answer

Let’s restate the problem clearly: A flat square coil has N = 15 turns and area A = 0.40 m^2. It sits with its plane parallel to a magnetic field B = 0.75 T. The coil is flipped so that its plane becomes perpendicular to the field in Δt = 0.050 s. We’re asked for the magnitude of the average induced emf.

First, evaluate the magnetic flux through the coil before and after flipping. The magnetic flux is Φ = B · A · cos(θ), where θ is the angle between the field and the coil’s normal.
- Initially, when the plane is parallel to the field, the normal is perpendicular to B, so θ = 90°, cos(θ) = 0. Therefore Φ_initial = B A cos(90°) = 0.0 Wb.
- Finally, when the plane is perpendicular to the field, the normal aligns with B, so θ = 0°, cos(θ) = 1. Therefore Φ_final = B A cos(0°) = B A = 0.75 T × 0.40 m^2 = 0.30 Wb.

The change in magnetic flux through one turn is ΔΦ_one = Φ_final − Φ_initial = 0.30 − 0 = 0.30 Wb. For a coil with N turns, the total change in flux linkage is ΔΦ_total = N ΔΦ_one = 15 × 0.30 = 4.5 Wb.

The average induced emf in a coil is given by Faraday’s law: ε_avg = |ΔΦ_total| / Δt. Substituting the numbers: ε_avg = 4.5 Wb / 0.050 s = 90 V.

Now we examine the answer choices:
- 45 V: This would correspond to roughly half the flux change or half the turns contributing, which is not consistent with the full flux change of all 15 turns over the given time. It neglects the N factor and uses an incorrect flux value.
- 6.0 V: This is far too small for the given flux change and number of turns; it might arise from dividing by a larger Δt or forgetting the N factor, but it does not match the computed ΔΦ_total/Δt.
- 90 V: This exactly matches the calculation ε_avg = (N × ΔΦ_one) / Δt = (15 × 0.30 Wb) / 0.050 s = 90 V. It correctly accounts for both the flux change and the number of turns and the time interval.
- 36 V: This would imply a different combination, such as using a smaller ΔΦ or more modest factors, but does not align with the full flux linkage change over the interval for all turns.

In summary, the key steps are identifying the initial and final flux, computing the total flux linkage change across all turns, and dividing by the flipping time. Only the 90 V option is consistent with these steps, while the other options misrepresent either the flux, the number of turns, or the time interval.

PHYSICS 1201 SU2025 (10585) Final Exam- Requires Respondus LockDown Browser

A flat square coil of wire with 15 turns and an area of 0.40 m2 is placed with the plane of its area parallel to a magnetic field of 0.75 T. The coil is flipped so its plane is perpendicular to the magnetic field in a time of 0.050 s. What is the magnitude of the average induced emf in the coil?

查看解析

登录即可查看完整答案

类似问题

A circular coil with an area of 0.0500 m2 is wrapped with 500 turns of wire and is placed in a uniform magnetic field perpendicular to its plane. If the field changes in value from -0.100 T to +0.150 T in an interval of 0.500 s, what is the magnitude of the average voltage induced in the coil?

As a magnet is moved within a coil, the rate of change of the magnet field is proportional to the coil's induced (output) voltage. This describes which law?

Roses are [Fill in the blank] , violets are [Fill in the blank]

更多留学生实用工具

考试浏览器助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单