When flying at 100 knots, the turn onto the arc should be lead by:

Question

BlackTom AI · Accepted Answer

Question restatement: When flying at 100 knots, the turn onto the arc should be lead by:

Observation about options: The provided data does not include the list of answer choices, so we cannot compare multiple potential lead distances. The only explicit information given is that the stated correct answer is 0.5 NM. With missing options, our analysis must focus on the concept of a lead distance and why a value like 0.5 NM is used in this context.

Idea behind lead distance: In maneuvering onto an arc, pilots typically begin the turn ahead of the desired turn point so that the aircraft smoothly transitions from straight flight onto the curved path. This lead distance helps ensure the aircraft aligns with the arc without overshooting or undershooting the intended path.

Why 0.5 NM might be appropriate at 100 knots: At a relatively modest airspeed like 100 knots, a lead distance of about half a nautical mile provides enough room to start the bank and roll into the arc with a gentle transition, balancing the turn rate and the radius of the turn. This distance is short enough to avoid large overshoots while being long enough to establish coordination and establish the proper track onto the arc.

General considerations that affect lead distance: 
- Airspeed: Higher speeds require earlier initiation of the turn to maintain a stable transition onto the arc. 
- Desired turn radius and rate: A standard rate turn or a shallow arc will have different optimal lead distances. 
- Coordination and wind: Strong or cross winds may necessitate adjusting the lead point to maintain the intended track.

Regarding the missing options: Since no alternative lead distances are shown, we cannot critique why other values would be incorrect. If the other choices were, for example, 0.3 NM or 1.0 NM, we would assess whether those distances would reasonably place the aircraft onto the arc given 100 knots, balance turn performance, and avoid overshoot or undershoot. Without those options, the critical takeaway is understanding that the lead distance should be chosen to ensure a smooth transition onto the arc at the current speed, and 0.5 NM is a commonly cited value at 100 knots for a controlled join.

Summary thought: The concept centers on initiating the turn early enough to establish the arc without abrupt control inputs, with 0.5 NM serving as a practical lead distance at 100 knots in many standard procedures. However, the precise correct value should be verified against the specific aircraft performance data and the published procedure for the given operation.

FA_221 Lesson 26 Quiz

When flying at 100 knots, the turn onto the arc should be lead by:

View Explanation

Log in for full answers

Similar Questions

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

People born without creativity never can develop it

A product has a selling price of $20, a contribution margin ratio of 40% and fixed cost of $120,000. To make a profit of $30,000. The number of units that must be sold is: Type the number without $ and a comma. Eg: 20000

Which of the following statement regarding cost is correct:

Under the assumptions used in cost-volume-profit analysis, as the activity increases:

The CVP and break-even analysis are supported by a range of important assumptions. Which of the following is not an assumption of the CVP:

The break-even point is that at which:

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler