Air traffic control tower Class D airspace is usually:

Question

BlackTom AI · Accepted Answer

Question restatement: Air traffic control tower Class D airspace is usually:

Option 1: From FL 180 to FL 600. This is not characteristic of Class D airspace. Those flight levels describe high-altitude controlled airspace (more typical of upper enroute airspace), whereas Class D is a surface-to-specified altitude airspace surrounding smaller airports with towers. So this option misstates vertical boundaries entirely.

Option 2: 4nm (5sm) radius and 2,500 AGL. This aligns with the conventional description of Class D airspace: a core around the airport with a radius of about 4 nautical miles (which is 4 NM, roughly 5 statute miles) and a top at 2,500 feet above ground level (AGL). This is the standard configuration used to define many Class D zones.

Option 3: 10nm radius and up to 4,000 AGL. A 10 NM radius is larger than typical for Class D, and 4,000 AGL is higher than the standard top of 2,500 AGL for Class D in most cases. This combination would not match the usual Class D dimensions and sounds more like an expanded control area, not the standard Class D around a towered airport.

Option 4: 30nm radius and up to 10,000 MSL. A 30 NM radius is characteristic of larger terminal or enroute airspace sectors, not the Class D surrounding a towered airport. Also, 10,000 MSL (mean sea level) is a much higher ceiling than standard Class D, which is defined above the surface up to 2,500 AGL.

Reasoning summary: The core criteria defining Class D airspace around a control-towered airport are a surface-based area with a radius typically around 4 NM and a top at 2,500 feet AGL. Options 1, 3, and 4 either misstate the vertical limits (too high or too low) or exaggerate the horizontal radius beyond the typical Class D scope, making them inconsistent with standard Class D definitions.

Final note on which option matches the standard description: Option 2 accurately reflects the common Class D dimensions of a 4 NM radius and 2,500 AGL, whereas the other options deviate from these typical boundaries.

Air traffic control tower Class D airspace is usually:

View Explanation

Log in for full answers

Similar Questions

What airspace is depicted in the graphic?

A(n) ________ area may contain a high volume of pilot training activities or an unusual type of aerial activity, neither of which is hazardous to aircraft

The type of Special Use Airspace known as "Whiskey" Areas are also known as what?

What does MOA stand for?

The aircraft below is flying at 1,000 feet. What airspace is that aircraft in?

What type of chart can be used to find the lateral and vertical airspace of an air traffic control tower Class D airspace?

(Refer to Area 2.) Identify the airspace over Bryn Airport.

(Refer to Area 2.) Identify the airspace over Bryn Airport.

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler