You have planned a cross-country flight on a warm spring morning. Your course includes a mountain pass, which is at 11,500 feet MSL. The service ceiling of your airplane is 14,000 feet MSL. After checking the local weather report, you are able to calculate the density altitude of the mountain pass as 14,800 feet MSL. Which of the following is the correct action to take?

Question

BlackTom AI · Accepted Answer

Rephrasing the scenario helps frame the decision: you’re flying through a mountain pass at 11,500 ft MSL, with a density altitude calculated at 14,800 ft MSL, and your airplane’s service ceiling is 14,000 ft MSL. This means the air is effectively thinner than the aircraft is certified to operate safely at, which degrades climb performance and raises the risk of not clearing obstacles in the pass.
Option A: Continue as planned because mountain thermals will assist your climb. This is not a reliable or safe assumption. While thermals can provide lift in certain conditions, they are unpredictable and insufficient to overcome a density-altitude situation where required climb performance is compromised. Relying on thermals here could lead to an insufficient climb rate and entering the terrain, especially in a high pass with limited margin.
Option B: Replan your journey to avoid the mountain pass. This option directly addresses the heightened density-altitude challenge. With a density altitude of 14,800 ft and a service ceiling of 14,000 ft, the aircraft may not be able to achieve the required obstacle clearance in the pass, so rerouting to lower terrain or an alternative route enhances safety and reduces the risk of an overrun or an inability to climb.
Option C: Continue as planned since density altitude is only a factor for takeoff. This is a misconception. Density altitude affects all phases of flight, including en route and in-passing climbs, due to reduced engine power (in carbureted or certain engines), reduced prop efficiency, and poorer aerodynamics. It is not limited to takeoff scenarios.
In summary, recognizing that high density altitude reduces climb performance and increases the likelihood of not clearing terrain in a mountain pass supports choosing a safer routing, i.e., avoiding the pass rather than pressing on with the original plan.

View Explanation

Log in for full answers

Similar Questions

What is the primary factor that affects aircraft takeoff and landing distance?

Which of the following describes the maximum level flight speed for an aircraft?

Takeoff climb performance is decreased by 100fpm when the air conditioning system (if installed) is operating.

Now reflect on all three primary impacts of weather on aviation. How would you quantify the impact of weather on aircraft performance for this case?

When an aircraft is at a and a _ allow for increased compliance time and distance.

Pitch + __________ = Performance

In a consumer society, many adults channel creativity into buying things

Economic stress and unpredictable times have resulted in a booming industry for self-help products

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler